CDP FLOODING
Cisco Discovery Protocol (CDP) is a proprietary data-link layer protocol created by Cisco which is used to share the information on other...
DHCP STARVATION ATTACK
Our scenario involves the provision of IP address from the router as the DHCP server. Router: 192.168.100.1/24 DHCP client 1: Windows8...
NMAP: NETWORK MAPPER
Kali Linux employs a tool called NMAP to perform reconnaissance on the connected network. NMAP uses raw IP packets and It functions as a...
MPLS: L3VPN ROUTE REDISTRIBUTION TO CE
The objective of this topic is to implement route redistribution to the CE router. We will be using the GNS3 configuration that we have...
MPLS: ROUTING BETWEEN THE CE AND PE
The objective of this topic is to implement a dynamic routing (RIP, OSPF, EIGRP, BGP) between the Customer Edge router (CE) and the...
MPLS: CONFIGURING VRF ON PROVIDER EDGE ROUTER
Our objective on this topic is to implement a Virtual Routing and Forwarding (VRF) on MPLS Provider Edge router (PE). We will be using...
BGP: BASICS
BGP or Border Gateway Protocol is the largest and slowest routing protocol in the world and this is the only routing protocol being used...
MPLS: VPN CAPABILITIES ON BGP
Our objective on this topic is to implement an internal BGP between the provider edge router (PE-LocationA, PE-LocationB and...
LABEL DISTRIBUTION PROTOCOL
On this topic, we will be using the previous configuration scenario we have established on our last discussion regarding MPLS...
IMPLEMENTING MPLS
We will use the network topology below to implement MPLS. Requirement: GNS3 C7200-ADVIPSERVICESK9-M Loopback: PE-LocationA -...
